 |
| Quantity: | |
|---|---|
| Model: AY-LB7S10A-T004-LB7S10A Ver: A | ||
| Test Item (Test at normal temperature 25±2℃) | Criterion | |
| Communication Interface | I2C BQ34Z100 | |
| Voltage | Charging voltage | DC：29.4V CC/CV（4.2V/Cell）7s |
| Capacity | Designing battery capacity（PCM） | 10Ah |
| Supply Current | Normal operating mode current：Fuel gauge in NORMAL mode. ILOAD >Sleep Current | ≤160uA |
| Low-power operating mode current：Fuel gauge in FULLSLEEP mode.ILOAD < Sleep Current | ≤80uA | |
| Maximal continuous charging current | 10A | |
| Maximal continuous discharging current | 10A | |
| Balance current for single cell | 84±10mA | |
| Over-charge Protection (single cell) | Balance voltage for single cell | 4.2V±0.05V |
| Over charge detection voltage | 4.28±0.05V | |
| Over charge detection delay time | 0.5S—2S | |
| Over charge release voltage | 4.10±0.1V | |
| Over discharge protection (single cell) | Over discharge detection voltage | 3.0±0.05V |
| Over discharge detection delay time | 0.5S—2S | |
| Over discharge release voltage | 3.2±0.1V | |
| Current protection (Battery pack) | Discharge Over current detection current | 50±10A |
| Detection delay time | 0.5S—2S | |
| Release condition | Cut load, Auto Recovery | |
| Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 200-600us | |
| Release condition | Cut load | |
| Resistance | Main loop electrify resistance | ≤ 20mΩ |
| Temperature | Temperature protection | +65℃ |
| Operating Temperature Range | -40～+85℃ | |
| Storage Temperature Range | -40～+125℃ | |
| SIZE: L100*W65*T8mm LED SIZE: 30*16*3 (6) | ||
| NTC: 10KNTC B=3435 Temperature switch：/℃ (the batteries temperature) Weak current switch：/ Activation Method:/ | ||
| Model: AY-LB7S10A-T004-LB7S10A Ver: A | ||
| Test Item (Test at normal temperature 25±2℃) | Criterion | |
| Communication Interface | I2C BQ34Z100 | |
| Voltage | Charging voltage | DC：29.4V CC/CV（4.2V/Cell）7s |
| Capacity | Designing battery capacity（PCM） | 10Ah |
| Supply Current | Normal operating mode current：Fuel gauge in NORMAL mode. ILOAD >Sleep Current | ≤160uA |
| Low-power operating mode current：Fuel gauge in FULLSLEEP mode.ILOAD < Sleep Current | ≤80uA | |
| Maximal continuous charging current | 10A | |
| Maximal continuous discharging current | 10A | |
| Balance current for single cell | 84±10mA | |
| Over-charge Protection (single cell) | Balance voltage for single cell | 4.2V±0.05V |
| Over charge detection voltage | 4.28±0.05V | |
| Over charge detection delay time | 0.5S—2S | |
| Over charge release voltage | 4.10±0.1V | |
| Over discharge protection (single cell) | Over discharge detection voltage | 3.0±0.05V |
| Over discharge detection delay time | 0.5S—2S | |
| Over discharge release voltage | 3.2±0.1V | |
| Current protection (Battery pack) | Discharge Over current detection current | 50±10A |
| Detection delay time | 0.5S—2S | |
| Release condition | Cut load, Auto Recovery | |
| Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 200-600us | |
| Release condition | Cut load | |
| Resistance | Main loop electrify resistance | ≤ 20mΩ |
| Temperature | Temperature protection | +65℃ |
| Operating Temperature Range | -40～+85℃ | |
| Storage Temperature Range | -40～+125℃ | |
| SIZE: L100*W65*T8mm LED SIZE: 30*16*3 (6) | ||
| NTC: 10KNTC B=3435 Temperature switch：/℃ (the batteries temperature) Weak current switch：/ Activation Method:/ | ||
