 |
| Quantity: | |
|---|---|
| Model:AY-LB8S5A-T003 | ||
| Test item（Test at normal temperature 25±2℃ ） | Criterion | |
| Communication Interface | I2C | |
| Voltage | Charging voltage | DC：33.6V CC/CV（4.2V/Cell）8s |
| Capacity | Designing battery capacity（PCM） | 5.4Ah |
| Supply Current | Normal operating mode current：Fuel gauge in NORMAL mode. ILOAD >Sleep Current | ≤160uA |
| Low-power operating mode current：Fuel gauge in SLEEP mode.ILOAD < Sleep Current | ≤120 uA | |
| Low-power operating mode current：Fuel gauge in FULLSLEEP mode.ILOAD < Sleep Current | ≤80uA | |
| Maximal continuous charging current | 5A | |
| Maximal continuous discharging current | 5A | |
| Balance current for single cell | 42±10mA | |
| Over-charge Protection （single cell） | Balance voltage for single cell | 4.2V±0.05V |
| Over charge detection voltage | 4.25±0.05V | |
| Over charge detection delay time | 0.5S—2S | |
| Over charge release voltage | 4.10±0.1V | |
| Over discharge protection （single cell） | Over discharge detection voltage | 2.5±0.05V |
| Over discharge detection delay time | 0.5S—2S | |
| Over discharge release voltage | 3.0±0.1V | |
| Over Current protection （Battery pack） | ChargeOver current detection current | 15±3A |
| Detection delay time | 0.5S—2S | |
| Discharge Over current detection current | 15±3A | |
| Detection delay time | 0.5S—2S | |
| Release condition | Cut load,Auto Recovery | |
| Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 200-600us | |
| Release condition | Cut load | |
| Resistance | Main loop electrify resistance | ≤60mΩ |
| Temperature | discharge temperature protection | '-10~+65℃ |
| charge temperature protection | 0~+60℃ | |
| Operating Temperature Range | -40～+85℃ | |
| Storage Temperature Range | -40～+125℃ | |
| SIZE:L60.3*W40*T7 mm | ||
| NTC:10KNTC B=3435 Temperature switch：/ ℃ (the batteries temperature) Weak current switch:/ Activation Method:/ | ||
| Model:AY-LB8S5A-T003 | ||
| Test item（Test at normal temperature 25±2℃ ） | Criterion | |
| Communication Interface | I2C | |
| Voltage | Charging voltage | DC：33.6V CC/CV（4.2V/Cell）8s |
| Capacity | Designing battery capacity（PCM） | 5.4Ah |
| Supply Current | Normal operating mode current：Fuel gauge in NORMAL mode. ILOAD >Sleep Current | ≤160uA |
| Low-power operating mode current：Fuel gauge in SLEEP mode.ILOAD < Sleep Current | ≤120 uA | |
| Low-power operating mode current：Fuel gauge in FULLSLEEP mode.ILOAD < Sleep Current | ≤80uA | |
| Maximal continuous charging current | 5A | |
| Maximal continuous discharging current | 5A | |
| Balance current for single cell | 42±10mA | |
| Over-charge Protection （single cell） | Balance voltage for single cell | 4.2V±0.05V |
| Over charge detection voltage | 4.25±0.05V | |
| Over charge detection delay time | 0.5S—2S | |
| Over charge release voltage | 4.10±0.1V | |
| Over discharge protection （single cell） | Over discharge detection voltage | 2.5±0.05V |
| Over discharge detection delay time | 0.5S—2S | |
| Over discharge release voltage | 3.0±0.1V | |
| Over Current protection （Battery pack） | ChargeOver current detection current | 15±3A |
| Detection delay time | 0.5S—2S | |
| Discharge Over current detection current | 15±3A | |
| Detection delay time | 0.5S—2S | |
| Release condition | Cut load,Auto Recovery | |
| Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 200-600us | |
| Release condition | Cut load | |
| Resistance | Main loop electrify resistance | ≤60mΩ |
| Temperature | discharge temperature protection | '-10~+65℃ |
| charge temperature protection | 0~+60℃ | |
| Operating Temperature Range | -40～+85℃ | |
| Storage Temperature Range | -40～+125℃ | |
| SIZE:L60.3*W40*T7 mm | ||
| NTC:10KNTC B=3435 Temperature switch：/ ℃ (the batteries temperature) Weak current switch:/ Activation Method:/ | ||
