 |
| Quantity: | |
|---|---|
| Model:PCM-L15S50-L18 | ||
| Test item（Test at normal temperature 25±2℃ ） | Criterion | |
| Voltage | Charging voltage | DC：51.75V~63V CC/CV（3.45V~4.2V/Cell）15s |
| Supply Current | Normal operating mode current：Fuel gauge in NORMAL mode. ILOAD >Sleep Current | 600 uA,350 uA（average） |
| Maximal continuous charging current | 30-200A | |
| Maximal continuous discharging current | 30-200A | |
| Balance current for single cell | 32-58mA | |
| Over-charge Protection （single cell） | Balance voltage for single cell | can be adjusted by required |
| Over charge detection voltage | 3.6-4.35V | |
| Over charge detection delay time | 0.5S—2S | |
| Over charge release voltage | 3.4-4.15V | |
| Over discharge protection （single cell） | Over discharge detection voltage | 2.0-3.0V |
| Over discharge detection delay time | 150—300mS | |
| Over discharge release voltage | 2.3-3.2V | |
| Current protection （Battery pack） | ChargeOver current detection current | / |
| Detection delay time | / | |
| Discharge Over current detection current | 90-600A | |
| Detection delay time | 50ms—300ms | |
| Release condition | Cut load,Auto Recovery | |
| Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 200-800us | |
| Release condition | Cut load | |
| Resistance | Main loop electrify resistance | ≤50mΩ |
| Temperature | Operating Temperature Range | -40～+85℃ |
| Storage Temperature Range | -40～+125℃ | |
| SIZE:L250 *W100 *T18 mm | ||
| NTC: 10K NTC Temperature switch：/ Weak current switch：yes Activation Method:/ | ||
| Model:PCM-L15S50-L18 | ||
| Test item（Test at normal temperature 25±2℃ ） | Criterion | |
| Voltage | Charging voltage | DC：51.75V~63V CC/CV（3.45V~4.2V/Cell）15s |
| Supply Current | Normal operating mode current：Fuel gauge in NORMAL mode. ILOAD >Sleep Current | 600 uA,350 uA（average） |
| Maximal continuous charging current | 30-200A | |
| Maximal continuous discharging current | 30-200A | |
| Balance current for single cell | 32-58mA | |
| Over-charge Protection （single cell） | Balance voltage for single cell | can be adjusted by required |
| Over charge detection voltage | 3.6-4.35V | |
| Over charge detection delay time | 0.5S—2S | |
| Over charge release voltage | 3.4-4.15V | |
| Over discharge protection （single cell） | Over discharge detection voltage | 2.0-3.0V |
| Over discharge detection delay time | 150—300mS | |
| Over discharge release voltage | 2.3-3.2V | |
| Current protection （Battery pack） | ChargeOver current detection current | / |
| Detection delay time | / | |
| Discharge Over current detection current | 90-600A | |
| Detection delay time | 50ms—300ms | |
| Release condition | Cut load,Auto Recovery | |
| Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 200-800us | |
| Release condition | Cut load | |
| Resistance | Main loop electrify resistance | ≤50mΩ |
| Temperature | Operating Temperature Range | -40～+85℃ |
| Storage Temperature Range | -40～+125℃ | |
| SIZE:L250 *W100 *T18 mm | ||
| NTC: 10K NTC Temperature switch：/ Weak current switch：yes Activation Method:/ | ||
