 |
| Quantity: | |
|---|---|
Model:PCM-LB20S400A-AY306 ver: A | ||
| Test item（Test at normal temperature 25±2℃ ） | Criterion | |
| Voltage | Charging voltage | DC：69V~84V CC/CV（3.45V~4.2V/Cell）20s |
| Supply Current | Normal operating mode current：Fuel gauge in NORMAL mode. ILOAD >Sleep Current | ≤30uA |
| Maximal continuous charging current | 300A/4S 220A/20S | |
| Maximal continuous discharging current | 300A/4S 220A/20S | |
| Balance current for single cell | 36-42mA | |
| Over-charge Protection （single cell） | Balance voltage for single cell | 3.6-4.2V |
| Over charge detection voltage | 3.65-4.35V | |
| Over charge detection delay time | 0.5S—2S | |
| Over charge release voltage | 4.05-4.15V | |
| Over discharge protection （single cell） | Over discharge detection voltage | 2.4-3.0V |
| Over discharge detection delay time | 10—200mS | |
| Over discharge release voltage | 2.5-3.2V | |
| Current protection （Battery pack） | ChargeOver current detection current | / |
| Detection delay time | / | |
| Discharge Over current detection current | can be adjusted by required | |
| Detection delay time | 5ms—20ms | |
| Release condition | Cut load,Auto Recovery | |
| Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 200-600us | |
| Release condition | Cut load | |
| Resistance | Main loop electrify resistance | ≤ 65mΩ |
| Temperature | high temperature discharge protection | / |
| Operating Temperature Range | -40～+85℃ | |
| Storage Temperature Range | -40～+125℃ | |
| SIZE:L175 *W116.5 *T18 mm | ||
| NTC: / Temperature switch：/ Weak current switch：/ Activation Method:/ | ||
Model:PCM-LB20S400A-AY306 ver: A | ||
| Test item（Test at normal temperature 25±2℃ ） | Criterion | |
| Voltage | Charging voltage | DC：69V~84V CC/CV（3.45V~4.2V/Cell）20s |
| Supply Current | Normal operating mode current：Fuel gauge in NORMAL mode. ILOAD >Sleep Current | ≤30uA |
| Maximal continuous charging current | 300A/4S 220A/20S | |
| Maximal continuous discharging current | 300A/4S 220A/20S | |
| Balance current for single cell | 36-42mA | |
| Over-charge Protection （single cell） | Balance voltage for single cell | 3.6-4.2V |
| Over charge detection voltage | 3.65-4.35V | |
| Over charge detection delay time | 0.5S—2S | |
| Over charge release voltage | 4.05-4.15V | |
| Over discharge protection （single cell） | Over discharge detection voltage | 2.4-3.0V |
| Over discharge detection delay time | 10—200mS | |
| Over discharge release voltage | 2.5-3.2V | |
| Current protection （Battery pack） | ChargeOver current detection current | / |
| Detection delay time | / | |
| Discharge Over current detection current | can be adjusted by required | |
| Detection delay time | 5ms—20ms | |
| Release condition | Cut load,Auto Recovery | |
| Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 200-600us | |
| Release condition | Cut load | |
| Resistance | Main loop electrify resistance | ≤ 65mΩ |
| Temperature | high temperature discharge protection | / |
| Operating Temperature Range | -40～+85℃ | |
| Storage Temperature Range | -40～+125℃ | |
| SIZE:L175 *W116.5 *T18 mm | ||
| NTC: / Temperature switch：/ Weak current switch：/ Activation Method:/ | ||
